Xu Weiwei. 2017: Self-noise tests on seismic dataloggers. Acta Seismologica Sinica, 39(5): 806-813. DOI: 10.11939/jass.2017.05.014
Citation: Xu Weiwei. 2017: Self-noise tests on seismic dataloggers. Acta Seismologica Sinica, 39(5): 806-813. DOI: 10.11939/jass.2017.05.014

Self-noise tests on seismic dataloggers

More Information
  • Received Date: September 20, 2016
  • Revised Date: December 11, 2016
  • Published Date: August 31, 2017
  • The self-noises of the seismic dataloggers have significant meaning for self-noise measurement of seismometers and dynamic range evaluation of broadband seimographs. In this study, we measured and analyzed the self-noises of six types of imported seismic dataloggers widely used in Chinese seismic observations based on multi-channel correlation analysis method. The results showed that self-noises of all six types of dataloggers are well below NLNM model when frequency domain is below 1 Hz in both high-gain and unity-gain modes by sensitivity conversion factor 750 V·s/m; however, for the frequency domain higher than 1 Hz, self-noises of the six types of dataloggers interlace with NLNM model, hence much care should be taken according to the goals of seismic observation. Reftek-130/130S and Q330HRS with high-gain sampling mode might be the preferable choice for the seismometer's self-noise measurements.
  • 滕云田, 胡星星, 王喜珍, 王晓美, 卢红娅, 王喆, 张旸. 2016.用多通道AD分级采集扩展地震数据采集器的动态范围[J].地球物理学报, 59(4): 1435-1445. doi: 10.6038/cjg20160424

    Teng Y T, Hu X X, Wang X Z, Wang X M, Lu H Y, Wang Z, Zhang Y. 2016. Extending dynamic range of the seismic data acquisition system by using multi-channel ADC[J]. Chinese Journal of Geophysics, 59(4): 1435-1445 (in Chinese). doi: 10.6038/cjg20160424
    Evans J R, Followill F, Hutt C R, Kromer R P, Nigbor R L, Ringler A T, Steim J M, Wielandt E. 2010. Method for calculating self-noise spectra and operating ranges for seismographic inertial sensors and recorders[J]. Seismol Res Lett, 81(4): 640-646. doi: 10.1785/gssrl.81.4.640
    Holcomb G L. 1989. A Direct Method for Calculating Instrument Noise Levels in Side-By-Side Seismometer Evaluations[R]. Albuquerque, New Mexico: U.S. Geological Survey: 89-214.
    Ringler A T, Hutt C R. 2010. Self-noise models of seismic instruments[J]. Seismol Res Lett, 81(6): 972-983. doi: 10.1785/gssrl.81.6.972
    Sleeman R, van Wettum A, Trampert J. 2006. Three-channel correlation analysis: A new technique to measure instrumental noise of digitizers and seismic sensors[J]. Bull Seismol Soc Am, 96(1): 258-271. doi: 10.1785/0120050032
    Sleeman R, Melichar P. 2012. A PDF representation of the STS-2 self-noise obtained from one year of data recorded in the Conrad Observatory, Austria[J]. Bull Seismol Soc Am, 102(2): 587-597. doi: 10.1785/0120110150
    Welch P. 1967. The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms[J]. IEEE Trans Audio Electroacous, 15(2): 70-73. doi: 10.1109/TAU.1967.1161901
  • Cited by

    Periodical cited type(1)

    1. 张海,高俊焱,王岱,刘中宪,李程程,张聪. 青海门源M_S6.9地震强地面运动精细化模拟. 震灾防御技术. 2023(03): 462-470 .

    Other cited types(2)

Catalog

    Article views (817) PDF downloads (91) Cited by(3)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return